Firmware

Updating Firmware For Q330's

Upgrading Q330 firmware is done with the program Willard.

 

Setup: Download the required firmware from http://q330.com/ Place the firmware into a folder with the name of the firmware (in this example the folder name would be "1.80"). Note: This is important because all Q330 firmware files are named identically. To keep them separated, they must be stored in separate folders.

 

Willard:

Power up the Q330 and connect it to computer via console cable.

Start Willard and select console registration.

 

Select "No" if asked to create a dataless station.

 

 

Syndicate content