Loading Programs

Loading Programs From Laptop to Q330's

 

 

Open the Windows control panel by pushing start button and then Settings and Control Panel.

 

 

 

Look under Ports (COM & LPT) to find the available com port numbers. In this picture we know that it is the “Keyspan” on COM 4 because we were using a Keyspan adapter.

 

If the Dataless Station panel appears select No. Otherwise proceed to the next step.

Loading Programs From a Clie To RT130's

This page is meant as a quick reference guide for using the Clié program "PFC-130" to load configuration parameters to a RT130. When deploying RT130's in the field, you will be provided an installation worksheet which covers the same steps but with more detail specific to your experiment.

Basic Guide for Loading Parameters to a RT130 from a Clié

1. Open PFC-130, on the Clié

2. Select Work with Configuration

3. Load (Load Configuration Pre-Written or Loaded Config File)

4. Select OK

5. Verify Configuration Name top of screen

6. Send to DAS

7. Select OK

8. Select Done

9. Re-Enter Work with Configuration

10. Select from DAS (Load from DAS)

11. Edit

12. Confirm Experiment Name

Syndicate content